Triplex Plunger Pump AMTLP Series

Triplex Plunger Pump AMTLP Series

Triplex Plunger Pump AMTLP
Triplex Plunger Pump AMTLP

Application of Triplex Plunger Pump AMTLP Series

  • Hydroblasting
  • Tube Cleaning
  • Paint Removal
  • Hydro Test
  • Surface Preparation & Many More….

Special Features of Triplex Plunger Pump AMTLP Series

  • Electric motorized driven system
  • Heavy duty precision gear box
  • Totally enclosed drive mechanism.
  • Self oiling system quick acting relief valve.
  • Brass unloaded valve with inlet bypass
  • Adjustable pressure regulator
  • Trolley mounted pump unit.

Material Of Construction

CRANKSHAFT
Spheroidal Graphite Iron: Crankshaft is made of nitrated, hardened and tempered Spheroidal Graphite Iron casting.
MAIN BODY (CRANK CASE)
GREY CAST IRON Main body in grey iron casting FG-260. With Honned surface finish bore.
PISTON (CROSS HEAD)
Alloy steel construction for hard surface coating and super finish.
CONNECTING ROD
Alloy steel construction for hard surface coating and super finish.
PISTON (CROSS HEAD)
 Alloy steel forged steel connecting rods with antifriction bearings. Heavy pin area construction, for added load strength.
BEARING 
Oversized for maximum life and load distribution. Self alignment roller bearing enables it to handle 26% more load than other pumps.
PUMP HEAD 
Liquid end is made of high corrosion resistant forged SS 304.
COMPLETE VALVE
Valves made stainless steel for hardened & anti corrosion hard surface coated for long life. High volumetric efficiency valves operate at 96% efficiency plus.
PLUNGER 
CERAMIC / TUNGSTEN COATED Primarily composed of ceramic coated or Tungsten coated. Surface roughness is extremely good i.e. <0.2 Ra.
PLUNGER SEAL
PTFE ARAMIDE ”V” Style strong and tightens under load or aramide fiber yarn packing for high compressive & tensile strength ensure effective sealing.

Technical Details

  • Plunger Stroke : 40 mm
  • Plunger Force : 12.5 KN
  • Max. Plunger Speed : 1.26 m/sec @ 950 spm
  • Inlet Pressure Min. / max : 2 to 3 bar
  • Oil Type : 15 W 40
  • Oil Capacity : 4.5 Ltr
  • Max. Liquid Temp. : 70 DEG. C ( 160 DEG. F)
  • Suction Connection : 3/4” BSPF
  • Discharge Connection : 1/2” BSPF
  • Medium : Clean Water
  • Available Direct Couple 1000 RPM for 50 Hz (Not 60 Hz) or 1450RPM For Pulley – belts drives or Gear Box

AMTLP Series Product Range For Hydro Test Application

Model No. Plunger Diameter(MM) Flow (LPM) Max. Rated Pressure(KG/CM2) Strokes Per Minute Motor (HP) Inlet Outlet
AMTLP – 120/10 12 10 1200 750 40 3/4” 1/2”
AMTLP – 120/08 12 8 1200 620 30 3/4” 1/2”
AMTLP – 120/07 12 7 1200 550 25 3/4” 1/2”
AMTLP – 120/05 12 5 1200 415 20 3/4” 1/2”
AMTLP – 100/14 14 14 1000 750 40 3/4” 1/2”
AMTLP – 100/10 14 10 1000 550 30 3/4” 1/2”
AMTLP – 100/08 14 8 1000 450 25 3/4” 1/2”
AMTLP – 100/07 14 7 1000 350 20 3/4” 1/2”
AMTLP – 75/18 16 18 750 750 40 3/4” 1/2”
AMTLP – 75/13 16 13 750 550 30 3/4” 1/2”
AMTLP – 75/10 16 10 750 450 25 3/4” 1/2”
AMTLP – 75/08 16 8 750 350 20 3/4” 1/2”

AMTLP Series Product Range For Hydroblasting & Hydrotest

Model No. Plunger Diameter(MM) Flow (LPM) Max. Rated Pressure(KG/CM2) Strokes Per Minute Motor (HP) Inlet Outlet
AMTLP – 50/30 18 30 500 1000 40 1” 3/4”
AMTLP – 48/29 18 29 480 970 40 1” 3/4”
AMTLP – 48/21 18 21 480 710 30 1” 3/4”
AMTLP – 47/18 18 18 470 615 25 1” 3/4”
AMTLP – 47/15 18 15 470 500 20 1” 3/4”
AMTLP – 40/37 20 37 400 1000 40 1” 3/4”
AMTLP – 38/36 20 36 380 970 40 1” 3/4”
AMTLP – 39/26 20 26 390 710 30 1” 3/4”
AMTLP – 38/23 20 23 380 615 25 1” 3/4”
AMTLP – 38/19 20 19 380 500 20 1” 3/4”
AMTLP – 32/45 22 45 320 1000 40 1” 3/4”
AMTLP – 32/44 22 44 320 970 40 1” 3/4”
AMTLP – 32/32 22 32 320 710 30 1” 3/4”
AMTLP – 31/28 22 28 310 615 25 1” 3/4”
AMTLP – 31/23 22 23 310 500 20 1” 3/4”
AMTLP – 25/59 25 59 250 1000 40 1” 3/4”
AMTLP – 24/57 25 57 240 970 40 1” 3/4”
AMTLP – 25/42 25 42 250 710 30 1” 3/4”
AMTLP – 24/36 25 36 240 615 25 1” 3/4”
AMTLP – 24/30 25 30 240 500 20 1” 3/4”

Special Notes & Application

Note :

  1. Maximum Permisible fluid temperature is 70 Deg. C.
  2. Power calculations shown in the table is based on maximum rated pressure however for low pressure requirement, power will also be propertionally Pump speed lower then specified in above chart is also available for special application.
  3. Volumetric efficiency is considered @ 100% where not specified.

Note :

  1. Flow rates indicated are at 100% volumetric efficiency. Actual flow rate will be >= 90%
  2. All models are suitable for 50 Hz (1450 RPM) and 60 Hz (1800 RPM) power specification

Note: Above product details briefly outline our current standard pump range. Due to constant development in pumps and improve the performance of our all products information is subject to change without any notice. Product colour is not a identity of product.

sms